For routine measurements and quality control and for finished product or goods receipt inspection
- Small compact at line or laboratory instrument for moisture analysis
- Provides readings within milliseconds to obtain sensor values quickly and reliably.
- Equiped with a 5.7“ (14,5 cm) backlit monitor for graphical or numerical display of the results
- Up to 25 different calibrations and 250 readings can be stored in the system memory with interface for transfer of values to PC or printer
- Not affected by varying product properties e.g. density, color or physical state
Hand-held for portable measurement
for quick moisture measurement during goods receipt inspection, or in storage.
M007 Mobile MW 1100 and MW 1100S Series
Sensor installation in the Silo hopper
Online measurement: Directly in the exhaust hopper or over a bypass.
M007, M007 Plus or M007 By-Pass
Sensor installation at ejection location
Sensor installation at the drop-off point at the end of a conveyor.
M007 or M007 Plus
Laboratory sensors for measurement on samples
For quality control and for ensuring quality, for product development or goods receipt inspection.
M007 Lab MW 1150, for routine measurements
M007 Lab MW 4300 or MW 4310 series for sophisticated laboratory applications.
Vibrating conveyor system
Installation of the planar sensor directly in a vibrating conveyor.
M007 Plus and special cable set.
Sensor installation in the sliding block
Installation of the M007 sensor above the product stream before the swaging, or granulating, of material on conveyor belts.
M007, M007 Plus or M007 By-Pass
Sensor installation in the wall on the buffer silo
Installation of the planar sensor between two conveyor belts, or vibrating conveyors.
M007, M007 Plus or M007 By-Pass
Connection kit for analog output 4-20 mA
Hoppers, brushes, dishes
Spare beakers for beaker sensors
